مشخصـــــــــــــــــــــــــــــــــــــــــات فنــــــــــــــــــــــــــــــــــــــــــــــــــــــــی
ریکو برد (Rico Board) یک کامپیوتر single board است که دارای performance بسیار بالا است. این برد با سیستم عامل لینوکس سازگار است.
از ویژگی های این برد می توان به موارد زیر اشاره کرد:
پردازنده AM437x شرکت TI با معماری آرم کرتکس A9
512 مگا بایت حافظه DDR3
فلش eMMC 4 گیگا بایت
فلش QSPI 16 مگا بایت
حافظه EEPROM 32 کیلوبایت
پورت سریال دیباگ
دارای USB 2.0
دارای پورت اترنت (Ethernet) 1 گیگا بایت
دارای اسلات کارت TF
دارای پورت HDMI
دارای دو کانال دوربین
دارای کانال LCD
Technical specifications
The Rico Board is an excellent high-performance Single Board Computer (SBC) using the newest TI’s AM437x Sitara ARM Cortex-A9based solution. This new generation solution has an increase in performance, as well as extensive reuse from the ARM Cortex-A8 offerings. It features up to 1GHz of processing power, 3D graphics acceleration for rich graphical user interfaces, PRU-ICSS for industrial protocols, improved Vector Floating Point (VFP) unit and other peripherals and interfaces support like Quad-SPI, dual parallel cameras, two independent eight-channel ADCs, etc.
The Rico board is equipped with 512MB DDR3, 4GB eMMC Flash, 16MB QSPI Flash and 32KB EEPROM on board. Additionally, it has rich peripherals including a Debug serial port, USB 2.0 Host and Device ports, a Gigabit Ethernet port, TF card slot, HDMI port, dual camera interfaces, LCD interface, Two 2.54mm pitch 40-pin expansion connectors allow the availability of more I/Os for peripheral signals like two SPI, two I2C, two CAN, four UARTs, one MMC and eight-channel ADC.etc.
The Rico Board is capable of running Linux operating system and provided with Linux 3.12.10 SDK of which the kernel and many drivers are in source code.
|
Item
|
Features
|
|
Processor
|
Up to 1GHz TI AM437x Sitara ARM Cortex-A9 32-Bit RISC processor
- POWERVR SGX Graphics Accelerator subsystem for 3D graphics acceleration to support display and gaming effects
- Single-cycle vector floating point (VFP)
- Dual camera and display processing subsystem
- Cryptographic acceleration and secure boot
- PRU-ICSS enables simultaneous industrial Ethernet protocols and motor feedback protocols
- Support for 32 bit LPDDR2/DDR3/DDR3L
- Low power: ~5mW deep sleep and < 0.1mW RTC-only
- Simplified power sequence for flexible power designs
|
|
Memory
|
512MB DDR3 SDRAM (2 x 256MB, 32-bit), compatible with 256MB/1GB DDR3 SDRAM
|
|
Storage
|
4GB eMMC
256/512MB Nand Flash (reserved)
16MB QSPI Flash
32KB EEPROM
TF card interface
|
|
Communications
|
1 x Debug serial port
1 x 10/100/1000M Ethernet
1 x Mini USB 2.0 Device port
1 x USB Host 2.0 port
|
|
Display
|
1 x HDMI interface
1 x LCD interface
|
|
Input and Output
|
1 x 1.27mm pitch 20-pin JTAG interface (not soldered, on the back of the board)
2 x 30-pin Camera Interfaces
4 x Buttons (1x Reset, 2 x User, 1 x Power)
5 x LEDs (3 x User LEDs, 1 x Power indicator, 1 RGB LED)
|
|
Others
|
2 x 2.54mm pitch 40-pin female expansion connectors brought out peripherals below:
- 2 x SPI
- 2 x I2C
- 2 x CAN
- 4 x UARTs
- 1 x MMC
- 8 x ADC
|
|
Dimensions
|
65mm x 100mm x 1.6mm (8-layer PCB design)
|
|
Power supply
|
USB power supply or DC 5V/2A
|
|
PMIC
|
Power Management IC (TPS65218)
|
|
Working Temp.
|
0~70 Celsius
|
|
OS support
|
Linux 3.12.10
|
